Accessories
Select a product below to view the appropriate accessories list:
Current Products
Kantronics KPC-3+ Accessories
Hardware
Clock Kit
Installation of the clock chip allows for retention of date and time while the unit is off.
Firmware Version 9.1 EPROM
EPROM update for the KPC-3+. Brings software up to version 9.1. Contains all the popular APRS functions, digipeating, and the EMWIN command. Also includes multi-user PBBS and KNET, and improved APRS DIGI operation.
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutters/strippers, small Phillips and regular screw drivers, and a wire stripper or sharp knife. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
Software
PacTerm 2.0
PacTerm 2.0 for DOS.
Available as a free download.
KPC-3+
Kantronics 9612XE Accessories
Hardware
Firmware Version 9.1 EPROM
EPROM update for the KPC-9612XE. Brings software up to version 9.1. It contains all the popular APRS functions, digipeating, and the EMWIN command, as well as improved APRS DIGI operation.
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutters/strippers, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
9600 Cable Kit
Includes DB-15 D-sub connector for port two of KPC-9612 family, KWM-9612 family, and KAM family TNC's.
Software
PacTerm 2.0
PacTerm 2.0 for DOS.
Available as a free download.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
9612XE
Kantronics KWM-1200+ Accessories
Hardware
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutter/stripper, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
KWM-1200+
Kantronics MT1200 Accessories
Hardware
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's. Note that the power jack on the MT is different than other TNC models. The power plug on this adapter will need to be removed, and the wire attached to the MT power plug.
Telemetry Plug
This connector mates with the telemetry connector on the rear of the MT1200.
It uses spring-contact terminals, so no tools are required when installing your telemetry wiring.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
MT1200
Kantronics KAM-XL Accessories
Hardware
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutters/strippers, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
9600 Cable Kit
Includes DB-15 D-sub connector for port two of KPC-9612 family, KWM-9612 family, and KAM family TNC's.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
KAM-XL
Legacy Products
Kantronics KML-5000 Accessories
There are no accessories listed for the KML-5000.
KML-5000 Passive Tracker
Kantronics Talon UDC Accessories
External Hardware
Talon Mounting Bracket
Allows convenient mounting of the Talon data radio.
Software
Talon Configuration Utility
This free utility provides you with easy graphical point-and-click configuration of your Talon data radio. Included on the software CD that comes with the Talon, it is also availabe as a free download (ZIP, 345k. Requires Microsoft .Net framework to run. See the readme.txt file in the .zip file.)
Talon Telemetry Demonstration Program
This free user-configurable sample Telemetry Program is for use with our Talon data radios. Included on the software CD that comes with the Talon, it is also available as a free download (ZIP, 353k). The program requires Microsoft .Net framework to run. See the readme.txt file in the .zip file. While you obviously won't see live data unless you have a Talon data radio, you can configure the sites and displays without the radios.
Talon UDC Data Radio
Kantronics KAM-98 Accessories
Hardware
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutter/stripper, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
RS-232 Cable (not a kit)
DB-25 to DB-25 serial cable for connecting TNC's to PC's.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
KAM-98
Kantronics KPC-3 Accessories
Hardware
128K RAM Memory Chip
Low power, static RAM memory chips for increased storage of mailbox information in Kantronics TNCs.
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutter/stripper, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
Software
PacTerm 2.0
PacTerm 2.0 for DOS.
Available as a free download.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
KPC-3
Kantronics KPC-9612 Accessories
Hardware
128K RAM Memory Chip
Low power, static RAM memory chips for increased storage of mailbox information in Kantronics TNCs.
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutter/stripper, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
9600 Cable Kit
Includes DB-15 D-sub connector for port two of KPC-9612 family, KWM-9612 family, and KAM family TNC's.
Software
PacTerm 2.0
PacTerm 2.0 for DOS.
Available as a free download.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
KPC-9612
Kantronics KWM-9612+ Accessories
Hardware
Power Supply
AC/DC converter for 12 VDC power compatible with all Kantronics TNC's.
Cable Kits
These cable kits are not necessary if you have just purchased a new Kantronics TNC. Order these only if you need to make up new or extra cables.
These are true Kits -- the cables are NOT molded or premade. Each kit DOES contain an assembly manual, one (appropriate) connector, one connector backshell (covering) and three feet of multi wire shielded cable. The kits do NOT contain any of the radio connectors required for attaching to your transceiver (radio). You must obtain these and have the necessary tools on hand to complete the kit(s).
Tools: We recommend that you have a small soldering iron, solder, locking pliers to hold the connector in place while soldering, wire cutter/stripper, and small Phillips and regular screw drivers. A well-lighted area for assembly is highly recommended.
1200 Cable Kit
Includes DB-9 D-Sub connector for port one of all TNC's.
9600 Cable Kit
Includes DB-15 D-sub connector for port two of KPC-9612 family, KWM-9612 family, and KAM family TNC's.
Specifications subject to change without notice or obligation.
All registered trademarks remain the property of their respective owners.
KWM-9612+